| Analog Audio Input |
XLR and 1/4" balanced (T/R/S) |
| Input Level |
-2dBu to +20dBu, balanced;
-22dBu to 0dBu, unbalanced |
| Input Impedance |
100kΩ, balanced;50kΩ, unbalanced |
| Analog Audio Output |
XLR and 1/4"T/R/S balanced |
| Output Level |
+18dBm, balanced;+4dBm, unbalanced |
| Output Impedance |
125Ω, balanced |
| Digital Audio Input |
XLR, AES/EBU;
Coaxial RCA, S/PDIF |
| Format |
AES/EBU, balanced;
S/PDIF, unbalanced |
| Sample Rate |
44.1kHz and 48kHz |
| Digital Audio Output |
XLR, AES/EBU;
Coaxial RCA, S/PDIF |
| Format |
AES/EBU, balanced;
S/PDIF, unbalanced |
| Sample Rate |
44.1kHz and 48kHz |
| Conversion |
24-bit A/D;24-bit D/A |
| Internal Audio DSP |
24-bit (PCM 81);20-bit (PCM 91) |
| Frequency Response |
10Hz - 20kHz ±.5dB |
| Crosstalk |
-55dB 10Hz to 20kHz |
| THD |
<0.006%, 10Hz - 20kHz |
| Dynamic Range |
D/A:>98dB typical, 10Hz - 20kHz
A/D:>105dB typical, 10Hz- 20kHz
A/A:>96dB typical, 10Hz - 20kHz |
| MIDI Interface |
5-pin DIN connectors for MIDI IN, THRU and OUT |
| Footswitch |
1/4"T/R/S connector for two independent momentary footswitches (system detects normal-open, or normal-closed on power up) |
| Foot Controller |
1/4"T/R/S connector for foot pedal(100Ω- 10kΩimpedance) |
| Memory Card |
|
| Connector |
PCMCIA type l cards, 68 pins |
| Standards |
PCMCIA 2.0 and JEIDA 4.0 |
| Card Format |
Up to 1MB of SRAM (attribute memory not required) |
| Power Requirements |
100 - 240 volts AC;50 - 60Hz;35 watts
Automatic switching (3-pin IEC connector) |
| Remote Power In |
2.5 mm 9 volts AC (not included) |
| Dimensions |
19" W x 1.75" H (1U) x 12" D
(483 x 45 x 305 mm), rack mount standard |
| Weight |
6.4 lbs.(2.9 kg) |
| Operating Temperature |
32°to 104°F (0°to 40°C) |
| Maximum Humidity |
95% without condensation |
